Plain-language guides to local vancouver

Rain Jacket Buying Basics: Fabrics, Fit and Features

how to choose a rain jacket

Wondering how to choose a rain jacket that keeps you dry without leaving you sweaty? Match the waterproof rating to your weather, check for taped seams, and pick a fit for your activity.

This guide sits inside the wider look at the best outdoor gear for vancouver weather, so start there if you are sorting out the rest of your kit too.

Item Value
Water-resistant, light showers Below 1,500 mm hydrostatic head
Light to moderate showers 1,500-5,000 mm
Heavy rain for extended periods 10,000-20,000 mm
Extreme weather 20,000 mm+
British Standard waterproof minimum More than 1,500 mm
Hydrostatic head test duration 24 hours

These figures come from Ellis Brigham’s buying guide and Mountain Warehouse’s waterproof jacket guide. Retailers describe the bands a little differently and figures can change, so check the source before you rely on them.

What waterproof ratings actually mean

A hydrostatic head rating measures how much water pressure a fabric can withstand before it starts to leak, and Ellis Brigham says a higher rating means greater waterproof ability. In the test, the fabric is pulled tight under a sealed tube of water and observed for 24 hours, as Mountain Warehouse describes it.

Ellis Brigham offers these general bands, measured in millimetres of water:

  • Below 1,500 mm: water-resistant, suitable for light showers.
  • 1,500-5,000 mm: good for light to moderate showers for a couple of hours.
  • 10,000-20,000 mm: ideal for heavy rain for extended periods.
  • 20,000 mm+: designed for extreme weather conditions.

Mountain Warehouse notes that waterproofness is tested against the British Standard, which must be more than 1,500 mm, in its guide dated 27 August 2025. It describes jackets rated up to 2,000 mm as suitable for everyday use around town or walking the dog, and links to its full guide for the detail.

The takeaway: a higher number is not automatically better for you. Short walks to the bus need less protection than a long day in sustained rain, and a more protective fabric is only worth it if you will actually meet that weather.

Waterproof or water-resistant: what to check on the label

A water-resistant jacket relies on a durable water repellent (DWR) finish, so droplets bead and roll off the surface. Ellis Brigham says these are fine for light showers but will eventually allow water to seep in.

A truly waterproof jacket also needs taped seams, which are heat-sealed seams that stop water coming through the stitching. Mountain Warehouse says all seams must be taped for a jacket to be 100% waterproof, which matters most in heavy, prolonged rain.

Before you buy, run through this quick check:

  1. Look for a hydrostatic head rating on the tag or product page.
  2. Turn the jacket inside out and look for tape over the seams.
  3. Check that the product page mentions a DWR finish, so water beads on the outside.

Water-resistant styles tend to cost less, but they usually wear out sooner and may need reproofing more regularly, according to Mountain Warehouse. Weigh that price saving against how often you will wear the jacket.

Fabric layers and membranes explained

Most technical rain jackets use a membrane: an ultrathin film with pores too small for water to pass through but large enough to let body heat escape, as Public Lands explains. The same guide names Gore-Tex as the oldest and most recognizable membrane, and says any reputable waterproof and breathable membrane will keep water out.

How that membrane is built into the jacket changes weight and feel. Mountain Warehouse breaks the common constructions down like this:

  • Two-layer: the most common type, with a waterproof outer shell and an inner membrane of mesh, polyester taffeta or both.
  • 2.5 layer: generally lighter than a 3 layer jacket because there is no lining or mesh on the inside.
  • 3 layer: suitable for just about all weather conditions, including torrential rain.
  • 3 in 1: a waterproof outer shell with a detachable inner fleece, softshell or padded jacket, useful for changeable weather.

Think about how you will carry and wear the jacket. A lighter construction suits a pack you carry just in case, while a heavier-duty one suits days when the jacket stays on for hours.

how to choose a rain jacket Jacket details
A person in a yellow rain jacket holds a metal bottle outdoors.

Why does a waterproof jacket still feel wet inside?

Often it is perspiration, not a leak. Mountain Warehouse says it is common for people to feel as though their waterproof has leaked when in fact it is sweat from the inside.

Breathability depends on more than the membrane. Public Lands calls it the big X factor, shaped by face fabric, fit and pocket placement, and warns that in the worst conditions you may feel swampy even in the most breathable fabrics.

Look for helpers that let heat out. Pit zips and mesh-lined pockets can add to breathability, Mountain Warehouse says, and they let you vent without opening the front zip in the rain.

How a rain jacket should fit

Fit depends on what you will do in it. Ellis Brigham suggests a lower-volume, more athletic cut for high-energy activities like trail running, and a slightly more generous fit for hiking so you have freedom of movement and room for extra layers.

Try the jacket on over the layers you would really wear beneath it. Raise your arms, bend forward and turn your head to check that the sleeves, hem and hood move with you instead of dragging.

Cut matters too. Mountain Warehouse notes that women’s jackets often have shorter arms and a more tailored fit, and that a men’s jacket chosen for a looser feel may have wider shoulders and narrower hips.

If you plan to hike, the guide on what to wear hiking in the rain pairs well with this one for the layers underneath. Dry feet matter as much as a dry torso, so read how to choose hiking boots next.

Features worth checking before you buy

Small details decide whether a jacket is pleasant on a wet commute or a wet trail. Mountain Warehouse lists the main features to look for:

  • Hood: a stiffened peak adds structure to keep rain off your face, and an adjustable hood lets you fit it to your head.
  • Zips: waterproof outer zips that are smooth and durable.
  • Vents: underarm openings for extra ventilation.
  • Adjustability: cuffs and hem you can tighten for a better fit.

Decide which of these you will use most. A cyclist may care most about the hood and hem, while a hiker may care most about vents and pockets that stay accessible under a pack.

Frequently asked questions

Is water-resistant the same as waterproof?

Show answer

No. Ellis Brigham explains that waterproof jackets use membranes, coatings and sealed seams, while water-resistant jackets have a DWR finish that suits light showers but will eventually let water in.

What rating do I need for heavy rain?

Show answer

Ellis Brigham describes 10,000-20,000 mm as ideal for heavy rain for extended periods, and its guide reserves 20,000 mm+ for extreme weather conditions.

Do I really need taped seams?

Show answer

For heavy or prolonged rain, yes. Mountain Warehouse says a jacket needs all of its seams taped to be 100% waterproof.

Can I wear a men’s rain jacket if I prefer a looser fit?

Show answer

You can, but it was not cut for a female shape, so it may have wider shoulders and narrower hips, according to Mountain Warehouse. Try it on with your usual layers before deciding.